CS Time/TNA Documents

username password

Managing Devices

    View / Change a Device’s Time

    This option is used to view the time settings of the clocks and also enables the device’s time to be changed. To view a device’s time, proceed as follows:

    1. When the Browse Hardware window is displayed, select the Clock to be viewed and click on Set Date & Time.
    2. While the Computer is communicating with the selected device an information window will be displayed. 
       

    Manage-1.png
     

    1. Once communication has completed, the Set Clock Time Window will be displayed.
       

    Manage-2.png
     

    1. The time and date settings of the selected device and that of the computer are displayed.
    2. If the date and time of the device is to be reset to:
      1. Same as the PC’s, deselect the Manually Enter Time and Date check box (must not be ticked) and then select the Set Device Time and Date button.
      2. Set to a manually entered date and time (other than the displayed PC settings), select the Manually Enter Time and Date check box (must be ticked), use the Date select button and select the required date and also type in the new Time to be used (hh:mm:ss) and then select the Set Device Time and Date button to update the date and/or time setting of the device.
    3. If the displayed Date and Times are to be used, select the Close button to close the window and to use the time and date of the device as it was displayed.

    Send Card Information to a Clock

    This option is used to force clocking information to a selected clock. To force the card clocking information, proceed as follows:

    1. When the Browse Hardware window is displayed select the clock to which the clocking information is to be sent and the click on the Send Cards button.
       

    Manage-3.png
     

    1. When the Set All Cards window will be displayed, select the card clocking information option to be sent to the clock. The options are:
    1. In. This option will force all clockings to be set as being clocked in the In direction on the selected clock.
    2. Out. This option will force all clockings to be set as being clocked in the Out direction on the selected clock.
    3. Current. This option will force all clockings to be set to the current directions of each card.

     

    1. Select the Ok button to send the information to the clock.

     

     

    Permalink:  http://tinyurl.com/ohyd43t

    Page last modified 16:52, 16 Sep 2014 by cay-lynne CS Time/TNA Documents > Configuration Module > Devices > Managing Devices

    Comments1

    Viewing 1 of 1 comments: view all
    Screenshots on this page need to be renewed.
    Posted 12:01, 30 Jul 2013
    Viewing 1 of 1 comments: view all
    You must login to post a comment.
    Attach file

    Files3

    Powered by MindTouch Core